Y04100263 Jenn-Air Range/Stove/Oven Timer Repair

Failure codes, problems, and resolutions for Jenn-Air timer model # Y04100263

Jenn Air ERCs and Jenn Air stove clocks and timers Manufacturer :  Jenn-Air
Part Number :  Y04100263
Appliance Type :  Range/Stove/Oven
Color : 
Description :  Electronic Timer

 
 
Do you have a failed Jenn-Air Y04100263 timer?
Click here:

We can repair or replace your faulty Y04100263 timer.
Request Appliance Timer Service

Recent Service Requests for Jenn-Air Part Number Y04100263

CityModel NumberFailure CodeProblem DescriptionResolution
delta, British ColumbiaW156not knownClock light goes on and off. Sometimes the "cancel / off" button does not work. You have to hit the "bake button" , turn down the temperature control, and try again one or more times. If this part cannot be fixed, then please let me know as soon as possible by email to so I can get a new ovenAwaiting receipt of timer
Chilliwack, British ColumbiaW276N/AFront panel lights up intermittently and many times not at all. Sometimes tapping the front it will illuminate but then goes out. Impossible to operate the oven under these conditions. several other weird things like oven fan comes on by itself and if you push cancel off a bleeping alarm comes on.Repaired
Winnipeg, ManitobaW156W-CNoneDisplay not working but oven functions ok. Sometimes comes on intermittently if tapped or when oven heats up.Awaiting receipt of timer
Eagan, MinnesotaWM2780WN/ADigital light won’t come on.Awaiting receipt of timer
Conway, New Hampshirew276faded outFADED DIGITSAwaiting receipt of timer
Willoughby, OhioW276N/ASome buttons on front do nothing now, such as setting the clock, or the oven timer.Awaiting receipt of timer
San Clemente, CaliforniaF2/F4oven started preheating then stopped with failure codes F2,F4 and audible alarmAwaiting receipt of timer
Canfield, OntarioW2780W-CN/AOven will not stay on when activated.Repaired
Edmond, OklahomaW2780WN/AOven will not stay onRepaired
Charlotte, North CarolinaW156Wdisplay led's not wothe display is not working - no readoutAwaiting receipt of timer
Quebec, QuébecW2780W-Cf-2 f-4The oven is stopping from time to time without any patern or precursor sign. When it stops, the alarm starts beeping and a failure code is shown at the screen. This code is different each time between these two : F-2 or f-4Awaiting receipt of timer
Canfield, OntarioW2780W-CN/AWARRANTY REPAIR. Timer repaired last week for not staying on when activated. NEW PROBLEM. Clock/Timer/Oven rheostat will not change time or oven temperature.Beyond Repair
delta, British ColumbiaW156not knownInterested in reconditioned. If not available then a repair clock light goes on and off. Sometimes "off" button does not work. Temperature light usually does not work.Awaiting receipt of timer
Shamong, New JerseyW276N/ADisplay not lit, oven will not turn on, no response from touchpad(clock was be adjusted when it went off). Microwave on top works fine. Replaced relay board and no difference.Beyond Repair
SNELLING, CaliforniaW276WNo codeDisplay goes out, oven turns off as display resets, but oven doesn't always turn off when this happens.Oven still works as display goes out. Can press litely on oven set knob and timer display will reapear for a while then fade out. I have to pull ribbon cable and pin connector out and reinstall and display is back, maybe a day or a week. When cancell wire is connected from front panel, it beeps after an hour or two on it's own, and won't quit beeping. I have pulled end ribbon cable connection only out of connector on timer and it quits beeping. Doing this we have to hit bake button again and turn heat setting to zero and oven turns off that way.Repaired
COMSTOCK PARK, MichiganWM2780BNONECAUSES RELAY TO CLICK ON AND OFF FOR 10-15 SECONDS THEN SHUTS OFF. NO ERROR CODESReplaced with reconditioned timer
Mississauga, OntarioW2780W-Cn/aAfter desired oven "Bake" temperature is set (timer indicates accurately), timer shows minimum temp. (140 F). Oven sounds like it's doing what it should (small click, etc.), but lower bake element does not heat, and temperature display on timer goes blank after 30 seconds to 1 minute. Initially the bake element would heat if "Convection" was selected. Once the oven was a little heated, I could cancel "Convection," select "Bake" and continue, but soon the symptoms experienced on "Bake" were duplicated on "Convection." Using "Broil" to get things started worked for a similarly short time, until the oven wouldn't heat up at all.Awaiting receipt of timer
Winsted, ConnecticutW156F4intermittent F4 fault - even with new oven sensor disconnected. Intermittent alarm even when oven unused...Repaired
Victorville, Californiaw276f1f1Awaiting receipt of timer
Auburn, CaliforniaW156WNo codeTouch pads on front panel are not responsive for bake, broil, convection, etc. Probe and time set functions work. Replacement panel exhibits same symptoms.Replaced with reconditioned timer