WPW10340304 Whirlpool Range/Stove/Oven Timer Repair |
Failure codes, problems, and resolutions for Whirlpool timer model # WPW10340304 |
![Whirlpool ERCs and Whirlpool stove clocks and timers]() |
Manufacturer : |
Whirlpool |
| Part Number : |
WPW10340304 |
| Appliance Type : |
Range/Stove/Oven |
| Color : |
|
| Description : |
Electronic Range/Oven Timer |
|
Do you have a failed Whirlpool WPW10340304 timer?
Click here:
We can repair or replace your faulty WPW10340304 timer. |
![Request Appliance Timer Service]() |
Recent Service Requests for Whirlpool Part Number WPW10340304| City | Model Number | Failure Code | Problem Description | Resolution |
|---|
| Kenora, Ontario | YWFE710H0AW0 | F6 E1 | Oven not working | Awaiting receipt of timer | | Winnipeg, Manitoba | YWFE710H0BW0 | Runaway TMP F6E1 | Oven Over heats please send me a price for new and a reconditioned unit | Awaiting receipt of timer | | St. Catharines, Ontario | YEFE710H0BS1 | none | | Beyond Repair | | St. Catharines, Ontario | YEFE710H0BS1 | none | The broiler stays on during the bake function. The food burns on top while the rest is uncooked. It doesn't seem to register that it is well over temperature. | Repaired | | port elgin, Ontario | YWFE710 | F6E1 | oven continues to heat. | Repaired | | Wahnapitae, Ontario | YWFE745HOFH | N/A | Convection element overheated and could not be shut down.
Turned off power supply to reset.
Bake element came on and functioned normally.
Tried convection setting and temperature climbed immediately and could not be stopped.
Turned off power to reset but the oven came on immediately and could not be turned off. Had to shut power down completely. | Repaired | | Winnipeg, Manitoba | | none | oven temp to low | Awaiting receipt of timer | | St. John's, Newfoundland and Labrador | YWFE710h0BW | N/A | relay on control panel switches on broil element and does not switch it off. | Awaiting receipt of timer | | Queens County, Nova Scotia | YWFE710H0BS1 | F6E1 | Oven temperature increases beyond temperature displayed, then message "default detected" scrolls across screen. | Repaired | | KINDERSLEY, Saskatchewan | YWFE710H0BS0 | BAKE RELAY K2 | RUNAWAY TEMPERATURE
I ATTEMPTED TO REPLACE RELAY K2 AND DAMAGED TO SOLDER PAD WHILE SOLDERING. | Beyond Repair | | TORBAY, Newfoundland and Labrador | YWFE710H0BS1 | N/A | OVEN NOT HEATING PROPERLY | Awaiting receipt of timer | | Langhorne, Pennsylvania | WFE714HLAS0 | F6E1 | Oven heats up to high | Awaiting receipt of timer | | calgary, Alberta | YWFE710H0BS0 | NONE | Bake element will not turn off. Temperature on the stove can be set to 300 degrees but it will continue to heat up to 500 degrees ++. It does turn off when the cancel button is pressed. Bake element keeps going if oven is set to convection, broil or bake. Temperature probe has resistance of 1070 ohms. Continuity of bake element seem good. | Repaired |
|
Established in
