| Carthage, Tennessee | 911.4712994 | None | Oven preheats to bake 350 in 15 seconds timer beeps. Bake nor broil unit working. 220 volts going into ECU no voltage coming out.Clock and timer seem to be working. | Awaiting receipt of timer |
| FAYETTEVILLE, Georgia | 911.4712994 | None | Clock and oven light work . Neither bake or broil element turn on.. | Awaiting receipt of timer |
| Lake Wylie, South Carolina | 9114012192 | does not give a code | when you turn the oven on sometimes it works perfect, sometimes it comes on and quits while cooking and sometimes it doesn't come on at all. | Beyond Repair |
| Enid, Oklahoma | 9114012992 | no code noticed, wil | won't turn on to heat oven must repeat turning on bake and setting temperature will keep going off | Repaired |
| TETERBORO, New Jersey | JDS26GOP3AD | None | I sent this timer to you in June of this year, and when it was returned to me I installed it and it worked fine. At the end of October my wife said it was not holding the proper temperature, but when i used the oven it appeared to be fine. This weekend I attempted to use the bake feature, set it for 400 degrees and waited fo a 'beep'. When I didn't hear it I checked the timer face. 'Bake' was off, temperature reading was not there, oven was cooling down. No amount of pressing bake or broil brought a response. All timer and clock features still work fine, but it will not heat up at all. No error messages have appeared. I would like to return it for repair under warranty, and assume that means I pay no shipping charges. | Beyond Repair |
| LINCOLNTON, North Carolina | JDS26GOT1AD | NO CODE SHOWING | OVER TIME, OVEN INTERMITTENTLY WOULDN'T MAINTAIN TEMPERATURE. THEN GRADUALLY, INTERMITTENTLY, OVEN WOULDN'T HEAT UP. NOW DOESN'T TURN OVEN ON AT ALL.
NEW ELEMENTS, NEW TEMP PROBE. REST OF RANGE OPERATES FINE. | Repaired |
| TETERBORO, New Jersey | JDS26GOP3AD | F1 | WITHOUT EVEN TURNING OVEN ON, F1 APPEAR AND A CONSTANT BEEP IS HEARD. TURN OFF CIRCUIT BREAKER, WAIT, RESTART, F1 RETURNS... | Repaired |
| Gastonia, North Carolina | Wall Oven Mod.#9114012192 | F01 | The timer shows a F01 code sometimes and also the oven will work sometimes but will cut off in the middle of cooking. | Repaired |
| Chambersburg, Pennsylvania | JKP26 | F1 | F1 error code | Awaiting receipt of timer |
| Collierville, Tennessee | JDC27GP3BG | F1 | F1 Beeping | Awaiting receipt of timer |
| Roanoke, Virginia | 911 4012191 | F1 | F1 with continuous beeping. The only way to stop the beeping is to trip the breaker. | Repaired |
| Charlotte, North Carolina | jdc27gol3bg | N/A | Bottom heating elementos not heating up. No current coming from control board | Awaiting receipt of timer |
| Rocky Mount, North Carolina | JDS27GOP38B | F1 | Has a F1 code and beeping | Repaired |
| Dublin, Georgia | 911.4012193 | N/A | Oven elements will not heat up. When you set a desired bake/broil temperature the oven timer shows 100 for a few seconds and then shuts off. | Repaired |
| LITTLE ROCK, Arkansas | jdc27gop38g | f1 | fi lighted on screen range is not working | Replaced with reconditioned timer |
| Brandon, Mississippi | model number JDS26GOTIWH | N/A | stove serial number VL350290 Q ( maybe Q, not sure )
>I replaced the controller a couple of years back but it has now ceased
> to display anything, and will only allow the bake element to heat, but
> no display at all.
> | Awaiting receipt of timer |
| mansura, Louisiana | 911.4712993 | f1 | not reaching correct temp. when in bake operation.flashed F1 only once or twice.broiler works ok and the timer also. temp seems to be off by 200 degree's ,changed sensor just see if it would make a diff. and no change. THANKS JERRY | Repaired |
| IRVING, Texas | 911 4012992 | f1 | It started beeping, and showed an F2 error code. We checked the oven temperature sensor and it was in range (1080 ohms) after shutting off the power. It stayed quiet for a few hours with the power back on, but then started beeping again with the F1 code and now does that very soon whenever the power is turned back on. The oven was still working and never had any problems functioning except for when the code wouldn't clear. | Repaired |
| Springfield, Oregon | ds26gp3ad | no display | no display or power to oven elements power for bake and broil at pcb | Awaiting receipt of timer |
| Anacoco, Louisiana | | F1 | Constant Beeping with F1 error code | Awaiting receipt of timer |
Established in
