WB27K5107 General Electric/Kenmore Range (Stove, Oven) Timer Repair

Failure codes, problems, and resolutions for General Electric/Kenmore timer model # WB27K5107

General Electric (GE) ERCs and General Electric (GE) stove clocks and timers

Kenmore ERCs and Kenmore stove clocks and timers

Manufacturer :

General Electric/Kenmore

Part Number :

WB27K5107

Appliance Type :

Range (Stove, Oven)

Color :

Description :

(part number WB27K5107 replaced with WB27K5140)

Do you have a failed General Electric/Kenmore WB27K5107 timer?
Click here:
We can repair or replace your faulty WB27K5107 timer.

(part number WB27K5107 replaced with WB27K5140) timer Part Number WB27K5107 is used in the following appliances

Recent Service Requests for General Electric/Kenmore Part Number WB27K5107

City	Model Number	Failure Code	Problem Description	Resolution
Valhalla, New York	J DP36GOT1WH	No failure code.	Display indicates oven has reached selected temperature however actual oven temperature is much cooler. (Typically 100F to 150F lower than display) No failure codes indicated. Timer was adjusted to add maximum +35F temperature however this has not corrected the issue.Note - This Model number also known as JDP36GP. Howard, In accordance with your instruction I have tested the following; Bake element = 19.5 ohms, Broil element = 17.6 ohms, Temperature sensor = 1,085 ohms, Temperature sensor wiring at oven timer connection = 1,085 ohms. Thanks! Dan Griffin 914-584-7459.	Repaired
Taylorville, Illinois	9114742994	None. Oven doesn't r	Oven will not reach set Bake/Broil temperature (only up to 250 degrees). Serviceman replaced Temperature Sensor, Bake AND Broil heating elements-- said Control panel was faulty and not available. Clock, Timer, everything else on display works-- NO ERROR messages.	Awaiting receipt of timer
ELIZABETHTOWN, Kentucky	911 4742996	N/A	wall oven will not heat	Awaiting receipt of timer
GLEN ALLEN, Virginia	J SP28GOP4BG	N/A	This oven indicates that it's up to temperature, but has been underbaking for a couple months. I've replaced the baking element and the temperature sensor, but it's still running under temperature (verified with oven thermometer).	Repaired
Scotrun, Pennsylvania	JSP40A0S2AG	N/A	Heating element lights, oven has not reached selected temperature when the element turns off then does not come back on. If I raise the desired temperature the heating element lights then again turns off without reaching the selected temperature.	Awaiting receipt of timer
Campbellsville, Kentucky	911 4742996	F2 F3	When heated the F2 and /or F3 codes will sound and the oven is turned off. Temperature probe sensor has been replaced and ohms out correctly. The original also ohmed out correctly. After it sits out all night, sometimes it will work. Checked with Fluke meter, temperature is accurate plus 10%. Seems to drop 50 decree and then heats make to temp and is pretty accurate when it is working. You may call 270-403-6919, Scott.	Repaired
easton, Pennsylvania	911 4742994	N/A	when set bake temperature at 400, oven temperature only goes to 150 according to oven thermometer. broiler works fine.	Repaired
riverdale, Georgia	9114742994	f1	f1 code loud beeping will not reset	Repaired
Woolrich, Pennsylvania	911.4672994	N/A	The oven signals that the desired temp has been reached. The elements are red. The elements soon no longer read and the temp is not reached	Awaiting receipt of timer
Media, Pennsylvania	JSP38GDS4BG	I think it was "7"	Loud beeping tone. Had to turn off circuit breaker to stop beeping. Surface burners would work while beeping. Didn't try to use oven.	Repaired
Huber Heights, Ohio	JRP14	F1	Getting F1 error on Control Panel display. Powering off/on the oven usually stops the error/beeping but only for a few minutes. Buttons, display, timer all work again normally for a few seconds or minutes but then F1 error starts flashing.	Repaired
Montgomery, Texas	JSP31GOP4WH	F1	Constant alarm	Awaiting receipt of timer
TOMPKINSVILLE, Kentucky		F1/BLANK	PROBLEM BEGAN WITH F1 FAULT NOW DISPLAY WON'T LIGHT AT ALL	Repaired
oklahoma city, Oklahoma	j sp31g0p4wh	N/A	set 550f bake temperature oven only heat up to 200f	Awaiting receipt of timer
Collinsville, Virginia	9114552092	None	This is the range control board/timer for a Kenmore drop-in range/oven. The oven works but is not heating to the specified temperature (e.g. When the oven temperature is set at 425 deg F, the actual oven temperature is less than 200). Replacement of the oven temperature sensor did not fix the problem.	Repaired
Harpers Ferry, West Virginia	911 4742994	none	Oven temp is approximately 170 degrees off. Replaced temp sensor. Same symptom. Measured temp sensor with DVM, ohm reading within expected limits.	Repaired
Quincy, Illinois	JSP28GP4BG	wont keep temperatur	won't keep temperature, already replaced thermostat and oven coil.	Awaiting receipt of timer
Richmond, Virginia	JRP14GOP4BG	N/A	The oven will not get hot enough	Repaired
Richmond, Virginia	JRP14GOP4BG	N/A	The oven will not get hot enough	Repaired
Loranger, Louisiana	JMP29G0T1BB	N/A	The stove was in a flood.	Awaiting receipt of timer