| peterborogh, New Hampshire | | N/A | do you have this part available either as a reconditioned or new | Awaiting receipt of timer |
| Milford, Ohio | Model#: JKP39G0K3 BG Serial #: TA610355G | N/A | BG Serial #: TA610355G
Display is not visible and Timer does not work. Oven cleaning function does not work. | Awaiting receipt of timer |
| Oakland, New Jersey | JKP38G0J1BG | LED LIGHTS ARE OUT | Don't know if this is a mechanical or electronic timer since the time has an LED display and the oven settings are dials. The LED on Timer is dark and the timer doesn't work as if there is no power, the oven still comes on with mechanical dials. | Awaiting receipt of timer |
| Lexington, Kentucky | J-KP38G0JGBG | Loud Buzz after clea | After a cleaning cycle, the oven has a loud buzzing sound. The timer seems to be working as there is a display but there is a loud buzz. I shut the power down at the breaker box and then back on the buzz is still there. | Awaiting receipt of timer |
| Cupertino, California | Oven: JKP38G0J4BG Timer: 164D1061P02 | None | Clock display blinks between blank (no display) and all 8s at approx. 1.5-2 sec interval; clicking sound at blink rate. | Repaired |
| ORANGE, Connecticut | JKP38G | DOES NOTHING | DOES NOTHING | Repaired |
| Lexington, Kentucky | JKP38G0J3G | Does not work at all | The Electronic Timer stopped working during cooking. While the oven itself seems to be working, the time works the self-cleaning function and that does not work. | Awaiting receipt of timer |
| Ann Arbor, Michigan | JKP38G0J6BG | PF | PF displayed and timer buzzer is now buzzing at low volume. Can't reset. | Awaiting receipt of timer |
| Hebron, Connecticut | JKP38G0J1BG | N/A | WATER POT PLACED IN OVEN DURING BAKING AND STEAM MADE CLOCK AND TIMER FUNCTION STOP | Awaiting receipt of timer |
| Upper Saddle River, New Jersey | JKP38G0J6BG | Not Working | This is a warranty repair. I received the timer back from you yesterday and when reinstalling into the range there are no lights working so you cannot see the time on the clock nor can you set the timer for self cleaning. | Beyond Repair |
| brooklyn, New York | jkp38g0j2bg | N/A | blanks out intermittently | Awaiting receipt of timer |
| Bellaire, Michigan | JKP38G0J3BG | PF | Worked OK at first, but would go blank. A slight tap would return the display. Then it showed a PF display and won't accept any commands and blinks on and off with a slight clicking sound, showing all 8s. Ovens continue to operate normally but without timer functions. | Awaiting receipt of timer |
| Upper Saddle River, New Jersey | JKP38G*6 | N/A | Clock/timer mechanism began sounding like a siren for a couple of minutes and then stopped. What was displayed was a "5" in the window for about two minutes then all lights went off. | Repaired |
| Troy, Michigan | JKP38G | P ??? | Timer stopped working as did clock. Oven will not begin self cleaning function. Display will give a random number on occasion. | Beyond Repair |
| hauppauge, New York | jkp38g | pf | rotory control to set time just spins | Awaiting receipt of timer |
| Sharon, Massachusetts | JKP38G0J1BG Double Wall Oven | N/A | This is for a GE Double Wall Oven. I have the wiring diagram if needed.
Spoke with Howard Simmons regarding symptoms. He thought it was the timer. Both ovens not holding temp, i.e., top oven on 400 but oven thermometer reading 350, then 325, then 425, bottom oven on 350, only going to 325 then up to 350. The clean time came on at 3 minutes. I turned it off. It came on three times in a half hour. The first time the oven had problems, the 3 minute came on, I shut it off, it came on, the lights in the oven went off and the readout went off. I shut the oven off and turned it back on 15 minutes later, the display came back but didn't hold the tem and the lights blinked again. I shut off the circuit breaker. | Beyond Repair |
| Anchorage, Alaska | jkp38gjbg | N/A | 0ne spade terminal broke off on pin #4 display comes on and off clicking with relay | Beyond Repair |
| warwick, Rhode Island | jkp38goj5b6 | N/A | initial problem - illumination would intermittently turn off
current problem - illumination remains intermittent, but now timer doesn't work. | Awaiting receipt of timer |
| warwick, Rhode Island | jkp38goj5bg | N/A | initial problem - illumination would intermittently turn off
current problem - illumination remains intermittent, but now timer doesn't work. | Awaiting receipt of timer |
| Fullerton, California | jkp38g0j2bg | PF | I spoke to Howard when I called your company and described the problem as the display just showing "PF". The dial on the timer doesn't electronically work, it just spins, so we can't use or program anything on it. | Awaiting receipt of timer |
Established in
