| Langley, British Columbia | Jgbp79wew1ww | F1 | Just flashes f1 and keeps beeping | Repaired |
| Hoffman Est, Illinois | | None | Controller operational, light bulbs for display are not functioning so display is very dim | Awaiting receipt of timer |
| Lakewood, New Jersey | GE Stove | Unknown | Display screen went | Repaired |
| Ancaster, Ontario | JGBP79WEW1WW | F3 | Intermittent F3 error. Oven will work sometimes and then not others. It has turned off the oven by itself as it preheated. It has heated to the right temperature and then worked for 15 to 20 minutes and then F3 error. I replaced the oven temperature sensor. It tested at 1100 Ohms. I then checked the wiring to the timer board and it also checked at 1100 Ohms. Hopefully the problem is with the board and it can be repaired. It is out and ready for shipping. When I removed it the E7 ground connector broke off so it can hopefully be repaired too. It is 23 years old so I guess it was brittle. | Repaired |
| Mississauga, Ontario | JGBP79WEW1WW | F 1 | I WAS TOLD ITIS DONE | Awaiting receipt of timer |
| Antigo, Wisconsin | JGBP79WEW1WW | N/A | WILL BEEP, NO ACTION FOR OVEN OR BURNERS, CONTROL IS BLANK, OVEN LIGHT DOES NOT WORK, BURNERS WILL NOT IGNITE | Awaiting receipt of timer |
| Miami, Florida | JGBP79WEV4WW | F1 | Timer alarm comes on on its own. Failure Code F1 displayed. No pre set or any other functions activated. Unable to turn off or set oven temperature and timer. LED display faint. All other functions work. Have unplugged the stove. | Timer inspected, no repairs necessary |
| windsor, Ontario | GE Profile JGBP79BEW1BB | No codes. No power | Timer would beep for extended periods. Clock was erratic, wouldn't keep time. Oven and broiler would still work. ( for about a year ). Now... Control circuit board is completely dead. No oven, broiler or any other function,including display. Just black like it's unplugged. thanks RN. | Awaiting receipt of timer |
| Canyon Country, California | JGBP79AEW1AA | - | The control panel in my GE XL44 Gas Range has gone bad. It started with intermittent beeping. Now I can no longer control the oven. I'm not positive about the part number but the model number is correct. | Repaired |
| windsor, Ontario | GE Profile JGBP79BEW1BB | No codes. No power | Timer would beep for extended periods. Clock was erratic, wouldn't keep time. Oven and broiler would still work. ( for about a year ). Now... Control circuit board is completely dead. No oven, broiler or any other function,including display. Just black like it's unplugged. thanks RN. | Awaiting receipt of timer |
| Reno, Nevada | JGBP79WEV3WW | ?? | All buttons quit working. Clock still shows. | Awaiting receipt of timer |
| RIVERSIDE, California | JGBP79WEW1WW | N/A | The display is dim and inconsistently lit. Some segments of the numbers are dimmer than the others. This is from my 90 year old mother's oven, and she currently has to turn off all of the lights in her kitchen in order to try to read the display. We would like it as bright as it can possibly be, please.
I had tried a DIY repair from a YouTube video, but it wasn't enough. I had emailed you guy and you said that you could still repair it. | Repaired |
| Mission Viejo, California | JGBP79WEV1WW | none/dim controls | oven works just cannot see control panel readouts and not known what the temp is when heating oven.
will take a reconditioned timer or open to having send ours in for repair. | Awaiting receipt of timer |
| Stoney Creek, Ontario | JGBP80MEV2BC | F3 | F3 code comes up occasionally and oven beeps. Sometimes the oven just shuts off while cooking. I checked the sensor resistance, it was about 1070 Ω cold, and it was replaced a few years ago, so I think it's ok. Please inspect and repair the ERC.
The display is very dim as well, but always has been. | Repaired |
| Atlantic Highlands, New Jersey | JGBP79AEV4AA | NONE | BUTTONS DO NOT RESPOND | Awaiting receipt of timer |
| WINDSOR, Ontario | JGBP79WEW1WW | DISPLAY DARK | DISPLAY DARK | Awaiting receipt of timer |
| Mt Prospect, Illinois | jgbp79aew1aa | F3 | Was Displaying error code F3. Now completely dead. | Awaiting receipt of timer |
| Mt Prospect, Illinois | jgbp79aew1aa | F3 | Cuts off While baking. Error code: F3 | Awaiting receipt of timer |
| syracuse, New York | jgbp79bew1bb | f1 | oven doesnt work | Repaired |
| Trenton, New Jersey | JGBP79WEV1WW | N/A | Needs to be replaced | Awaiting receipt of timer |
Established in
