ERC14500GE10039203B164D1954P001 General Electric Range/Stove/Oven Timer Repair

Failure codes, problems, and resolutions for General Electric timer model # ERC14500GE10039203B164D1954P001

General Electric (GE) ERCs and General Electric (GE) stove clocks and timers Manufacturer :  General Electric
Part Number :  ERC14500GE10039203B164D1954P001
Appliance Type :  Range/Stove/Oven
Color : 
Description :  Electronic Range/Oven Timer

 
 
Do you have a failed General Electric ERC14500GE10039203B164D1954P001 timer?
Click here:

We can repair or replace your faulty ERC14500GE10039203B164D1954P001 timer.
Request Appliance Timer Service

Recent Service Requests for General Electric Part Number ERC14500GE10039203B164D1954P001

CityModel NumberFailure CodeProblem DescriptionResolution
Prince George, British ColumbiaGas Range: GE XL44 JGBP35GEP3WGnoneIs not intermittent. There are no error codes. For several months now, with the oven temperature set up to 450F (I tested in 50F increments), the oven heats up to about 100F, displays the set temperature and then shuts off. May come back on eventually once it cools off. With the set point at 500F or above, the oven comes on, the display goes up to 495F and the oven stays on even when the temperature is well above 500F. During my test the temperature was almost 600F when I shut the oven off. I have tested the RTD temperature sensor and the resistance is within the specifications. In the past (not the last 2 years though) we have had intermittent error codes, which always went away and were not frequent. I believe the error code was F8 “Component failure within ERC affecting temperature processing circuits”. Since this code always cleared (typically after unplugging and plugging back in). I have been told it is not repairable by Turner, so am now looking for a replacement. I believe there are a number of equivalent later models that should be compatible.Awaiting receipt of timer