ERC14500GE General Electric Range/Stove/Oven Timer Repair |
Failure codes, problems, and resolutions for General Electric timer model # ERC14500GE |
![General Electric (GE) ERCs and General Electric (GE) stove clocks and timers]() |
Manufacturer : |
General Electric |
| Part Number : |
ERC14500GE |
| Appliance Type : |
Range/Stove/Oven |
| Color : |
|
| Description : |
Electronic Range/Oven Timer |
|
Do you have a failed General Electric ERC14500GE timer?
Click here:
We can repair or replace your faulty ERC14500GE timer. |
![Request Appliance Timer Service]() |
Recent Service Requests for General Electric Part Number ERC14500GE| City | Model Number | Failure Code | Problem Description | Resolution |
|---|
| Centreville, Virginia | JGBP26GEN4AD | N/A | When I would try to preheat the oven, it would take the temperature set point, then change the display from the set point to 100 degrees then turn off without heating like I had hit cancel. I had a repair service determine it was not the pilot light. | Repaired | | Newnan, Georgia | JGBP35WEV1WW | F-1 | Oven Beeps and Flashes F-1 | Awaiting receipt of timer | | Niles, Illinois | 911-3042990 | none | Oven does not heat to preset temperature Preheat temperature starts at 275 degrees. | Awaiting receipt of timer | | Houston, Texas | 362.7391594 | F1 | F1 error code would occur intermittently over the last year or two. We had been able to shut it off by hitting the clear or bake button. Recently F1 could not be shut off. Unplugging range, waiting 5 minutes, and replugging it in had no effect because F1 came back on. Internet forum suggested disconnecting the tape wire to the clock. I disconnected the tape wire I could get to since I couldn't open the oven dashboard very much. That stopped the F1 and enabled me to use the stove top. I hope you can fix it. Please return ship as cheaply as possible because I am not in a hurry to bake. Thank you. | Beyond Repair | | Troy, Michigan | JGBP26GEN2AD | None | New burner coil put in. Coil gets hot and then shuts off. Repair man said it was the relay that was bad. | Repaired | | Metamora, Michigan | GE XL44 - gas ,WB12K005 | F 1 | Continual F1 code with beeping. Range has been sitting for approx. 10 years, unused in a dry basement. Burners are working. We were able to start oven once before beeping and code began. | Repaired |
|
Established in
