Keewatin, Ontario | GJP85802 | No Code | Warranty item, timer sent back to us does not turn the convection fan on when convection is selected. Confirmed by trying timer from my other identical stove that fan does work. issue appears to be with the timer itself. | Beyond Repair |
Saint-Hippolyte, Quebec | GJP85802 | E1 F1 | After a power outage. My board display e1 f1 | Awaiting receipt of timer |
Keewatin, Ontario | GJP85802 | E1-F1 | Timer display does not show any values and comes up with error code E1-F1 after power outage | Repaired |
Keewatin, Ontario | GLP85800 | no code...display fl | Display flashes' all numbers and symbols on and off constantly when breaker is turned on. Tried turning off for a while and back on, no difference | Repaired |
Medicine Hat, Alberta | GJP85802 | New Bake Element Wil | The Lower Element burned out and I replaced it with a New Genuine Whirlpool One but it Does Not Heat Up Enough to
Cook anything. | Repaired |
Selma, Alabama | | N/A | touch pad does not work | Awaiting receipt of timer |
cormack, Newfoundland and Labrador | glp85800 | n/a | the timer is ontermient. some times when starting the ovem dont get hot. i have to press different settings to get it to work. no code appears | Awaiting receipt of timer |
Southampton, Ontario | GJP85202 | E1 F1 | Once power was restored, after a recent power outage all the timer display does is flash the error code. We followed the manufacturers procedure for fixing it. Did not work. Still flashing E1 F1. | Repaired |
Saint-Lazare, Quebec | GJP85802 | none | burned relay
if you don't have a refurbished, is it possible to buy relay from you? | Awaiting receipt of timer |
Mirabel, Quebec | GJP85802 | E1 F1 | E1 F1 error code posted fowling power loss. | Repaired |
Québec, Quebec | GLSP85900 | E1 -F1- | Error code E1 -F1- Can't start the oven or set the clock/timer. | Replaced with reconditioned timer |
STONEY CREEK, Ontario | GLP85900 | no error codes | We have a whirlpool GLP85900 range. Board # 9754114. No error codes.
The oven doesn't heat. No bake, no broil, no clean. All the power is there.
Door switch works, latch switch works and sensor reads around 1.1-1.4 k when unplugged from the board.
I can hear the clicking of the relays.
There is a "big" relay on the board (K1) and does not pull in.
Is there anything else I need to check before I remove the board to send it in for repair/replacement? | Repaired |
Ottawa, Ontario | GJP85802 | E1 - F1 | After a series of brief power outages, the oven/clock display flashed the error code "E1 - F1". I tried unplugging it, but it returns to that error code when I plug it back in, or after I press cancel. No oven functions work. | Repaired |
St. Martins, New Brunswick | c880 639539jo | N/A | clock shuts off and oven won't heat up above 265 | Repaired |
CALGARY, Alberta | GLP85800 | N/A | Replaced bake element, now oven does not reach temperature | Replaced with reconditioned timer |
Red Deer, Alberta | GLSP85900 | N/A | Oven will not turn on. Elements, and heat sensor tested fine. | Replaced with reconditioned timer |
William Lake, British Columbia | C880-639539J2 | N/A | oven controller for temp works intermittant | Replaced with reconditioned timer |
Winnipeg, Manitoba | GHP85800 | PF | The oven will be working fine and then will go into Power Failure mode, code PF. You can clear the code and then the oven will start again. It may do it again or you may get through your cooking cycle. | Replaced with reconditioned timer |
Likely, British Columbia | GLP85800 | None | On closing the oven door, there was a bright flag from the area of the controller, and it went blank. No lights or displays work, but the rotary switches still operate the burners on the stove top. | Replaced with reconditioned timer |
Cumberland, British Columbia | GLP85800 | E1 F1 | We disconnected power to level the unit. When we plugged it back in it displayed the error code and the oven would not work. The stove stop works normally.
Not sure what you mean by 'face colour'. The stove is white. | Repaired |