82382 Dacor Range/Stove/Oven Timer Repair |
Failure codes, problems, and resolutions for Dacor timer model # 82382 |
![Dacor ERCs and Dacor stove clocks and timers]() |
Manufacturer : |
Dacor |
| Part Number : |
82382 |
| Appliance Type : |
Range/Stove/Oven |
| Color : |
|
| Description : |
Electronic Range/Oven Timer |
|
Do you have a failed Dacor 82382 timer?
Click here:
We can repair or replace your faulty 82382 timer. |
![Request Appliance Timer Service]() |
Recent Service Requests for Dacor Part Number 82382| City | Model Number | Failure Code | Problem Description | Resolution |
|---|
| Thornhill, Ontario | rsd30s | N/A | display shows 0 blinking, non of the display works. touchpad works fine. | Repaired | | Delta, British Columbia | ERSD30 | F1 after oven turned | Main issue:
Select mode, mode displayed in amber on RHS of display. Select temperature, temperature is displayed in amber on RHS of display.
Either leave or select mode to lock in set temperature. Pre-heat mode illuminates, then "ON" flashes. Current temperature is displayed (i.e. 135 deg) and "ON" goes on steady. 7.5 seconds later, the amber mode, temperature and pre-heat goes blank. No tone, just blanks. If convection selected, fan goes on, but blanks like all other modes. Can hear relays on relay board changing state. Relay board and heat sensor have been replaced with new.
Can sometimes get oven to work by cancelling and reselecting mode and temperature, or selecting mode again and changing temperature, but not consistent. | Repaired | | Thornhill, Ontario | rsd30s | non | Hi, when i put oven on bake mode (or conv bake) i will try to set the temperature to 350 it will not get there, the most that it gives me is 291. hope it is the board, the relay board is operates fine as the broil and the bake element are working. | Timer inspected, no repairs necessary | | Seneca, South Carolina | CPS127 | F1 | Timer was sent and could not be repaired due to bad EPROM. Need to pay shipping to for return shipment. Talk to Howard Simons for details | Beyond Repair | | Calgary, Alberta | RSD30C | F1 (displayed occass | Clock, oven light and cancel work. Clock cannot be reset. Oven control pads do not work. Occurred after power outage. All as per our phone conversation of Nov.8. If unrepairable, only the membrane need be returned if is OK. This membrane is new and has not been used except to test the ERC. Thanks for your attention. | Beyond Repair |
|
Established in
