3195182 Whirlpool Range (Stove, Oven) Timer Repair |
Failure codes, problems, and resolutions for Whirlpool timer model # 3195182 |
|
Manufacturer : |
Whirlpool |
Part Number : |
3195182 |
Appliance Type : |
Range (Stove, Oven) |
Color : |
|
Description : |
Timer erc control (black) |
|
Do you have a failed Whirlpool 3195182 timer? Click here: We can repair or replace your faulty 3195182 timer. |
|
Recent Service Requests for Whirlpool Part Number 3195182City | Model Number | Failure Code | Problem Description | Resolution |
---|
Hopewell, Virginia | RF376PXDW | N/A | No error codes or anything visible | Repaired | Raleigh, North Carolina | rf376pxdw | N/A | "DEAD" LED READOUTS. Note: I was not able to test for power being received at the timer. The oven is at a beach house and I don't have a voltmeter available. | Repaired | Dublin, Ohio | RF376PXDN 1 | N/A | Touch surface broken | Awaiting receipt of timer | sarasota, Florida | rf376pxdq0 | N/A | to dim (cant see) | Awaiting receipt of timer | Norfolk, Nebraska | rf376pxdn1 | none | Oven will not maintain temp have installed new sensor and also adjusted temp on board but cust continues to advised that when baking at temps between 325 and 350 does not bake properly food will either be burnt or not done enough | Awaiting receipt of timer | Rapid City, South Dakota | RF376PXDN | N/A | Temp light and clock light are getting dim. Temp light is almost impossible to read. | Beyond Repair | Laramie, Wyoming | RF375PXDW | N/A | cant see temp and not sure oven temp is correct. not even sure oven is heating correct temp
need the control panel. could send old one to you but prefer to replace this one and then could give you old one | Awaiting receipt of timer | Mount Pleasant, Michigan | | N/A | Unit was subject to a voltage spike from the power company. The burners still work fine, but the oven control board is damaged. | Beyond Repair | Jacksonville, Florida | | N/A | backlight not functioning - can't read oven temp. | Awaiting receipt of timer | Nashville, Tennessee | RF375PXSW-0 | N/A | Timer was subjected to higher than normal voltage due to a backup generator problem. Though the timer was not field tested it is presumed that the transformer on the timer has been damaged. The timer is completely dead, no display evident. | Repaired |
|