| ES-400 | N/A | Remplacement | Awaiting receipt of timer |
| Edmonton, Alberta | CPDS389CC2 | N/a | No bake, broil, fan, no interior light with button or opening door, the beep sound when pushing buttons is faint.
The clock and settings work , I have resistance in both elements, 127 volts on both terminals and 250 volt measuring across both. | Awaiting receipt of timer |
| Ottawa, Ontario | C970-445781 | F9 | Cleaning cycle was tripped and stopped after a short time
F9 code came on clockface display and stays on
Stovetop still works fine
(You've heard this a thousand times right?)
We have checked the lock motor and it is fine.
It seems the problem is in the control circuit board. | Awaiting receipt of timer |
| Cayuga, Ontario | cgds388as1 | N/A | does not heat | Awaiting receipt of timer |
| Kitchener, Ontario | Gallery | N/A | The oven was on. I heard a "leaking" sound for a couple f seconds followed by a loud bang. The display went blank and the oven shut off. | Replaced with new in-stock timer |
| BEDFORD, Nova Scotia | | N/A | we had a power serge, then we had PF , -F9- ERR , that is now gone display panel seems to work fine now, but nothing happens when you turn something on, no heat | Awaiting receipt of timer |
| Laval, Quebec | CPDS389AC2 | N/A | oven dont work atall, no power in control panel, gas burner works well. | Beyond Repair |
| Laval, Quebec | CPDS389AC2 | N/A | oven dont work atall, no power in control panel, gas burner works well. | Beyond Repair |
| Ardrossan, Alberta | Gallery | None | Display dead. Range top still working and oven light comes on when opening the door. | Beyond Repair |
| St-Joseph-de-la-Rive, Quebec | CGES 387CS1 | N/A | | Awaiting receipt of timer |
| Montreal, Quebec | CPDS389CC2 | N/A | There was a sound like a light bulb blowing and the oven stopped working. However, the clock still works. | Repaired |
| Sudbury, Ontario | CGES387CS1 | None shown | Stove keeps losing power to oven. Then it comes on showing power failure code and when it has been reset the oven can be used again but it is never known how long it will last sometimes an afternoon and sometimes only a short time. | Beyond Repair |
| Milford Bay, Ontario | Gallery | N/A | Oven portion of stove quit working. Can choose bake or broil and a temperature and hit start. Looks like everything is working but neither element warms up. "Click" when turning on is very pronounced but now is very faint sounding. Oven light doesnt work, and after unplugging sometimes can't reset the clock. Every was working fine 2 days ago. | Repaired |
| Burlington, Ontario | CPDS389CC1 | N/A | Broiler and Oven heating elements not coming on. Light not working. No "beeps" when you push the buttons to set the oven on. | Awaiting receipt of timer |
| Didsbury, Alberta | CPES389AC3 | F9 and no buttons fu | Oven quit working but top burners still work. Buttons not responsive, clock flashes when power reconnected. | Beyond Repair |
| Parksville, British Columbia | CPES389CC2 | PF | Shuts off when bake is used
Appliance tech said he thought the bake relay was bad as unit works on the broil relay | Awaiting receipt of timer |
| Sherbrooke, Quebec | CPDS389AC2 | F9 | If you're not able to repair the timer, please tell me. If I can buy it at your compagny, please tell me the price. Thank you. | Awaiting receipt of timer |
| Sherbrooke, Quebec | CPDS389AC2 | F9 | If you're not able to repair the timer, please tell me. If I can buy it at your compagny, please tell me the price. Thank you. | Awaiting receipt of timer |
| Winnipeg, Manitoba | CGDS388AS1 | none | clock works
display works
no oven functions work | Repaired |
| Abbotsford, British Columbia | CGES387CB1 | F9 | Noticed that oven was not heating.
Tried various modes, no result.
buttons did not make beep sound
pressed clean cycle, no heat, but F9 error code appeared and the word clean stays on.
unplugged the range for several minutes several times.. no change
I have carefully checked the door switch, and lock switch. With the wires removed, the lock switch operates normally. The motor for the lock mechanism also works fine.
I can purchase a new lock mechanism, if you recomend, just for assurance and prevention of future failure.
Thanks | Repaired |
Established in
