318012903 Frigidaire Range/Stove/Oven Timer Repair |
Failure codes, problems, and resolutions for Frigidaire timer model # 318012903 |
|
Manufacturer : |
Frigidaire |
Part Number : |
318012903 |
Appliance Type : |
Range/Stove/Oven |
Color : |
|
Description : |
Clock/Timer |
|
Do you have a failed Frigidaire 318012903 timer? Click here: We can repair or replace your faulty 318012903 timer. |
|
Clock/Timer timer Part Number 318012903 is used in the following appliances |
Recent Service Requests for Frigidaire Part Number 318012903City | Model Number | Failure Code | Problem Description | Resolution |
---|
Linden, Michigan | FCS388WHCD | OFF | when attempting to use "bake" or "broil" with the oven door closed -- the LED (being faint) shows -- "OFF".
would like to have the boad checked for proper function before you start repair.
Thanks | Repaired | Brighton, Michigan | FES388WGCC | led too dim to see/f | 1.leds for temp can't be read
2. leds for timer are very dim and difficult to read
3. Faceplate has a hole in it . If faceplate is not available, I would be willing to purchase a refurbished timer assembly if available. | Repaired | Ottawa, Ontario | CFES388WGC3 | None | Dim display
Will reset intermittently. Clock reset, over stops cooking. | Repaired | Sewell, New Jersey | FCS388whca | N/A | dim | Awaiting receipt of timer | Philadelphia, Pennsylvania | Gallery Professional Series Convection Oven | N/A | The red light that indicates how hot the oven is being set for is incredibly dim and hard to see. Otherwise everything seems to be working fine. | Repaired | Toronto, Ontario | FES388WGC3 | Does not turn on | Clock/timer does not turn on. Oven does not turn on. Note stovetop burners still work. | Repaired | CROCKETT, California | FCS388WHCA | None | Oven temperature is very dim - near impossible to read | Awaiting receipt of timer | Bainbridge Island, Washington | FES388WGCH | dim display | clock is normal but the smaller temp display is too dim to see | Awaiting receipt of timer | Calgary, Alberta | FES388WGCC | N/A | Display too dim | Repaired | Walnut Creek, California | FCS388WHCD | none | Oven does not heat up to proper degree. Stops at about 100 degree.
Would like to purchase a reconditioned one if you have it. If not, would remove existing one and send to you. | Repaired | Phoenix, Arizona | FES388WGCC | N/A | 1. Broiler coil (top) heats up fine. Bottom coil heats up slowly but no higher that 280 degrees.
2. Led light is so dim that it can not be read. | Awaiting receipt of timer | DANVILLE, New Hampshire | FES388WGC | DEAD | EXTERNAL DAMAGE CAUSED SHORT- NOW STOVE IS DEAD | Repaired | Santa Rosa, California | FES388WGCH | F1 | Burners still work, Oven does not and alarm is sounding. Had power failure at house that started problem. | Awaiting receipt of timer | Bend, Oregon | FES388WGCI | NONE | CANT SEE LIGHTS VERY WELL. | Awaiting receipt of timer | Smithtown, New York | FES388WGCB | ? | After suspected power surge:
Fan in oven runs constantly (unless oven door is opened)
Oven temp is out of control (incinerated food that is supposed to cook 10 minutes in five) | Awaiting receipt of timer | Arlington, Massachusetts | FCS388WECE | Gone blank | Gone Blank after slowly getting dimmer | Replaced with reconditioned timer | Lexington, Kentucky | FCS388WECE | N/A | Light inside oven starting blinking randomly, followed by the lower heating element stopped working. Circuit board has what looks like burnt circles around to connection clips. | Awaiting receipt of timer | White Lake, Michigan | FCS388WECA | N/A | Dim temperature display | Repaired | Allentown, Pennsylvania | | N/A | Led does not come on, i.e., the control unit is completerly dark.... The light in the oven, the gas flames on the counter top, and the heated bottom drawer function perfectly. Can u help? | Awaiting receipt of timer | Montreal, Quebec | CFES388WGC3 | none | The bake element does not work. | Awaiting receipt of timer |
|