| Teulon, Manitoba | cgeb27s7cs1 | None | No bake element or convection element heat. Broil operates as normal. | Repaired |
| Val d'Or, Quebec | CGEB27S7CB2 | F-3 | It beeps with an F-3 code | Repaired |
| St. George, New Brunswick | CFEB789JGS1 | no code | The customer is wondering if you stock any of these reconditioned oven controls.
The display is very dim and difficult to read. If you do not have any stock would you be able to replace this display module? | Repaired |
| Greely, Ontario | cfeb389wec7 | no display | Note: I had this control panel repaired because of no display however when I tried it, oven and broiler would not turn on. I have a backup panel which is very dim, however, oven and broiler work with that panel. | Awaiting receipt of timer |
| Greely, Ontario | cfeb389wec7 | no display | Note: I had this control panel repaired because of no display however when I tried it, oven and broiler would not turn on. I have a backup panel which is very dim, however, oven and broiler work with that panel. | Awaiting receipt of timer |
| Spruce Grove, Alberta | CPEB30S8cc2 | no code | the timer face is blank | Repaired |
| Regina, Saskatchewan | CGEB27S7CB2 | N/A | Oven won't reach set temperature. Element heats up and then shuts off. | Repaired |
| Greely, Ontario | cfeb389wec7 | no display | Note: I had this control panel repaired because of no display however when I tried it, oven and broiler would not turn on. I have a backup panel which is very dim, however, oven and broiler work with that panel. - REPAIR UNDER WARRANTY | Awaiting receipt of timer |
| Salaberry-de-Valleyfield, Quebec | CGEB27S7CB1 | F1 | Problem started as oven was functionning for over 1 hour. It stopped heating and start locking the door. Cancel button wouldn't do anything. I shut off the breakers and when I restarted the oven, it worked for 5 minutes and now code F-1 appears with intermittent alarm on and off. | Awaiting receipt of timer |
| Halifax, Nova Scotia | CFEB386JGB2 | BAKE ELEMENT NOT WOR | BAKE ELEMENT WAS TESTED BY A TEC HAS 120VOLTS ON ONEE SIDE NOT 240 VOLTS | Repaired |
| Calgary, Alberta | CPEB30S8CC2 | none | No work of heating all.
convection fen was work. | Awaiting receipt of timer |
| Halifax, Nova Scotia | CFEB386JGB2 | bake element not com | Bake element will not come on, had it diagnosed and they told me the part was no longer available. did it was the clock timer a relay was not working. Also we noticed over the last year the clock is not as bright and flickers from time to time. | Repaired |
| Calgary, Alberta | CPEB30S8CC2 | none | No work of heating all.
convection fen was work. | Awaiting receipt of timer |
| Sussex, New Brunswick | CGEB27S7AS1 | none | Display is dim. Do you have a replacement either new or used? | Awaiting receipt of timer |
| montreal, Quebec | CGEB30S8CS1 | n/a | All off - electricity arrives at Control board (timer) but oven gives zero sign of life... | Awaiting receipt of timer |
| Gatineau, Quebec | CGEB27S7AB1 | Does not respond to | The oven would shut off after a certain time so I replaced the electrolytic capacitors (6) on the 2 interconnecte circuit boards that make up the control module. After that, the module would not respond to switches on the control panel. I repaired the flat cable from the switches which had lost contact inside the connector (Crimpflex), 5 connections. Still, the display kept on flashing the time of day but no response from the switches. So now I suspect the control module. Maybe the proprietary Robert Shaw chip? | Repaired |
| Sherwood Park, Alberta | CFEB786JGB2 | F3 | Replaced temp probe, still gives F3 fault intermittently. | Repaired |
| Sherwood Park, Alberta | Cfeb786jgs2 | F1-f3 | Beeps f1_f3 codes temp light only shows 1/2 screen | Repaired |
| Fisherville, Ontario | CGEB27S7CS2 | n/a | the clock is on, it will accept commands but nothing works. I had my local appliance repair person check over the oven and he said this was the problem
BTW do your longer warranties include shipping? | Repaired |
| Nakusp, British Columbia | CGEB27S7CB2 | No display | Was cooking and heard a pop, then the display of my oven turned off. I checked the circuit breaker and it was still on. The oven light still functions, just the display no longer lights up and I can no longer use the oven as a result. | Awaiting receipt of timer |
Established in
