3149459 Whirlpool/KitchenAid Range (Stove, Oven) Timer Repair |
Failure codes, problems, and resolutions for Whirlpool/KitchenAid timer model # 3149459 |
![Whirlpool ERCs and Whirlpool stove clocks and timers]() ![Kitchen Aid ERCs and Kitchen Aid stove clocks and timers]() |
Manufacturer : |
Whirlpool/KitchenAid |
| Part Number : |
3149459 |
| Appliance Type : |
Range (Stove, Oven) |
| Color : |
|
| Description : |
Electronic clock control |
|
Do you have a failed Whirlpool/KitchenAid 3149459 timer?
Click here:
We can repair or replace your faulty 3149459 timer. |
![Request Appliance Timer Service]() |
Recent Service Requests for Whirlpool/KitchenAid Part Number 3149459| City | Model Number | Failure Code | Problem Description | Resolution |
|---|
| Ione, Washington | KEDS100VAL0 | E2 E3 F1 | I have replaced elements and oven heat sensor. When I power it up it will start to heat then either sends error code or kicks the breaker. | Awaiting receipt of timer | | Portland, Oregon | KEDS200YWH | F3 | Fault code F3. I switched out the temp sensor probe for a new one. The oven operated one time during test to 400 deg. The next time I tried, the F3 code and warning alarm came on and I shut off the oven. The cook top burners still work. | Awaiting receipt of timer | | Portland, Oregon | KEDS200YWH | F3 | Fault code F3. I switched out the temp sensor probe for a new one. The oven operated one time during test to 400 deg. The next time I tried, the F3 code and warning alarm came on and I shut off the oven. The cook top burners still work. | Awaiting receipt of timer | | Marietta, Georgia | KEDC205YBL | N/A | operation functions just stopped working, leaving only clock working. I cycled power to the range and then even the clock did not work. I can hear relays activating, but the oven does not turn on , etc. | Awaiting receipt of timer | | Miami, Florida | keds200bwh-0 | f2/f3 | oven slow to heat, heat sensor has already been replaced. Start oven to pre-heat-error codes f2 and f3 come up. | Awaiting receipt of timer | | Martin, Tennessee | KEDC205BBL | F2 | RECEIVING F2 CODE; OVEN TURNING OFF | Awaiting receipt of timer | | Charleston, South Carolina | KEDS200BWH1 | F1, F2 and maybe | oven was slow to heat, would alarm and set codes, not get to full temperature. Replaced temperature probe with no improvement. Tested wiring to probe at 1100 ohm's at room temperature. | Repaired | | Marion, Ohio | KEDT105WBL-1 | F2/F3 | We replaced the temperature probe but still get the F2/F3 alarm intermittently. Also, when the oven tries to come on, it seems like we are not getting full voltage/current to the heating elements. Thanks for your help. | Repaired | | Lancaster, South Carolina | KEDC205YBL-2 | N/A | Tech sheets from online repair site indicate that the K1 relay is bad. Oven is slow to heat. Thermostat checks good. Elements check good. | Replaced with reconditioned timer |
|
Established in
