Many failure codes are caused by a faulty timer (also known as the Electronic Range Control). Sometimes, even when the failure code implies that another component has failed this can actually be a timer problem (whereby the timer is not displaying the correct fault code). If you are not sure whether the code you are seeing is due to a problem with the timer please call us, or send us an email, since we can help you determine whether the failure code is likely a timer problem or a problem with some other component. We can repair most timers so if you are sure your problem pertains to the timer (or ERC) please fill out a repair service request and send us your timer to be repaired.
4-Digit Failure Code
F0 - E0 | Analog to Digital Failure | Disconnect for 30 seconds - if display re-appears - repair control |
F1 - E1 | Safety flip flop | Repair Electronic Range Control/Clock(ERC) |
F2 - E0 | Shorted keypad | Repair Electronic Range Control/Clock(ERC) |
F3 - E0 | Oven temperature sensor or oven temperature sensor fuse opened | Replace oven temperature sensor or fuse |
F3 - E1 | Oven temperature sensor shorted | Replace oven temperature sensor |
F3 - E2 | Oven too hot | Replace oven temperature sensor |
F3 - E3 | Clean temp too hot | Replace oven temperature sensor |
F5 - E0 F5 - E1 and E2 | Check door/latch switch | Replace component |
2-Digit Failure Code
F0 or F1 or F5 | Failed transistor | Repair Electronic Range Control/Clock(ERC) |
F2 - E0 | Oven temp too high | - Test operation of door lock on self-clean models
- Test relay contact operation
- High resistance in oven temperature sensor
|
F3 | Open oven temperature sensor or thermal fuse | Replace oven temperature sensor or thermal fuse |
F4 | Shorted oven temperature sensor | Replace oven temperature sensor |
F6 | Problem in time keeping circuit | - Reset time and/or cooking operation
- Check for proper ground
|
F7 | Stuck function switch or button on Electronic Range Control (ERC) | Repair Electronic Range Control/Clock(ERC) |
F8 | Failure of Electronic Range Control (ERC) | Repair Electronic Range Control/Clock(ERC) |
F9 | Door lock circuit | Check wiring and test operation of door lock switch |