What is the timer/clock part number for the Frigidaire PGLEF385CS2 Electric Range?

Timer part number 318046742 OR 318193201 for Frigidaire PGLEF385CS2

The PGLEF385CS2 Electric Range uses timer part number 318046742 OR 318193201.

Do you have a failed Frigidaire PGLEF385CS2 control panel? Click here:

We can repair or replace your faulty Frigidaire PGLEF385CS2 timer.

PGLEF385CS2 are also sometimes referred to using these Alternative Names/Model numbers

Electrolux PGLEF385CS2 Electric Range

PGLEF385CS2 Schematic and Wiring Diagrams

Backguard Parts diagram

Body Parts diagram

Top/drawer Parts diagram

Door Parts diagram

Wiring diagram Parts diagram

Recent Service Requests

City	Problem Description	Resolution
GRIMSHAW, Alberta	BAKE ELEMENT GETING NO VOLTAGE	Repaired
CHILLIWACK, British Columbia	ERROR CODE WHEN PUSHING OVEN CONTROLS	Awaiting receipt of timer
Keene, Ontario	F3 code, sometimes instant and sometimes oven will heat up. temp sensor has been replaced new with no change, resistance verified, wiring inspected. Also keypad is intermittently dead or not responsive. Power down will most always reset it	Awaiting receipt of timer
Edmonton, Alberta	Bake element will not heat after self clean cycle was completed.	Repaired
Bas-Caraquet, New Brunswick	To : Howard Simons As discussed by email, please send me the invoice and the "New board in used case for $255" From Roger Chiasson	Replaced with new in-stock timer
Cochrane, Alberta	I heard a "pop" from behind display when I touched start for preheating. Resulted in the broil and bake element not heating up. All other functions, including the clock, still work.	Replaced with new in-stock timer
Toronto, Ontario	Timer has large part of board scorched on the inside. Part no. on board says SF5501 from my internet search I believe it is 318193201.	Replaced with new in-stock timer
Leduc, Alberta	No bake or broil functions work. Everything else works. No codes.	Repaired
Cochrane, Alberta	I heard a "pop" from behind display when I touched start for preheating. Resulted in the broil and bake element not heating up. All other functions, including the clock, still work.	Replaced with new in-stock timer
Hamilton, Ontario	Oven stopped - bake & broil not working. Clock panel is normal, the oven light & convection fan are operational. I spoke with service today and was told there are no reconditioned timers in stock & was quoted $255.00 for a brand new timer which is less than the original $325.00. I was informed this cheaper timer will provide the same functions as the other & is less because my stove has manual burner knobs. What are my options if this is not the case?	Replaced with new in-stock timer
Lantzville, British Columbia	Oven upper and lower elements produce very little heat, warm but touchable on any setting.	Replaced with new in-stock timer
Montreal, Québec	bake... display but oven is not hot	Repaired
north vancouver, British Columbia	Door Locked, Press a button says F1 - ERR and beeps.	Timer inspected, no repairs necessary
Ottawa, Ontario	Timer appears to have full functionality, but oven elements do not come on neither top nor bottom	Repaired
Brockville, Ontario	Per previous stock inquiry: Initial failure was 'pop' which tripped breaker. Found arc damage between timer relay PCB and display PCB behind main oven relay. Checked and found no wiring or element shorts. Cleaned boards and resoldered relay. No more arcing but display and keypad don't work properly so cannot use oven now. You replied Nov15/09 that a replacement timer was available from inventory. We would like to purchase it if it is still available.	Replaced with reconditioned timer
Surrey, British Columbia	Not working	Replaced with reconditioned timer
Sooke, British Columbia	After turning on oven there was a pop and burning smell then oven control panel just flash "E0"	Awaiting receipt of timer
Lac du Bonnet, Manitoba	Oven elements do not turn on broil or bake. Service tech determined ERC faulty.	Replaced with reconditioned timer
Montreal, Québec	The main element and the broiler element stop working. Main display still indicate that the oven is working	Repaired
Fort McMurray, Alberta	You had mentioned over the phone that the electronic stove controller 316272210 would work as well. My timer went pop and went black after I tried to turn the over on with it.	Replaced with reconditioned timer

Common problems for Frigidaire Electric Range PGLEF385CS2 Timer Repair

Are you encountering a similar problem as them? Contact us now and we will try to help you fix your PGLEF385CS2 timer-related problem.

I have Frigidaire Galery Series flat top electric oven. Both bake and broil elements stoped working. Display still shows them on. Convection fan is working. When I set bake ON and press start I can hear the electrinic module switching element on - but no heat is comming.

My Frigidaire cooker model PGLEF385CS2, Serial # XXXXX went bang last night and tripped the fuse box. I reset the fuse and the elements work fine, but the oven and grill don't work. The main digital display flashes numbers in the top left corner (hour of the clock) and 'or' is displayed on the top right. I replaced the 2x 15amp fuses on the top but that hasn't helped.

I have a frigidaire oven, the broli and bake elements are not working. The indicator sets temp and time but nothing heats up. It worked fine yesterday. the convect fan also works? would it be both elements at same time?

Hi there: This is a great forum, I just can't seem to find someone that has put up the same specific info that I have in order to create a good diagnosis. I live in Fort McMurray, home of the Oil Sands, and a northern city with little in the way of service repairfolk. Our landfill gets a lot of appliances that just have popped relays, etc. because it is cheaper to buy knew than to diagnose and fix or there is just no one to find to fix. So anyway, my problem. Went to start up my Frigidaire Smooth top oven tonight, (Bake @ 400F) and as I walked away from it I heard a pop and could smell a bit of burning. The circuit panel didn't break, and the oven panel went dead. Unplugging and resetting the panel breaker as options didn't change the scenario. All of the oven burners work, oven light works, etc. Just can't instruct the oven to turn on. I looked at the oven burners and found no instances of burning or welding. Took off the back panel and got a good woof of burnt stuff, so I am thinking

troubleshooting oven i have a electric oven.model#pglef385cs2 it is a frigidaire electrolux gallery series. 3 yrs old. when we turn on the oven say at 400 degrees it starts to heat up. then it will start beeping and give a f1 error code. in order to stop the beeping you have to open the oven door and keep hitting cancel. one thing i have notice while the door is open when the beeping starts the light will go out. i would appericate if you could help me out.