What is the timer/clock part number for the Electrolux PGLEF385CS1 Electric Range?
The PGLEF385CS1 Electric Range uses timer part number 318193201.
Do you have a failed Electrolux PGLEF385CS1 control panel? Click here:
We can repair or replace your faulty Electrolux PGLEF385CS1 timer.
PGLEF385CS1 are also sometimes referred to using these Alternative Names/Model numbers
PGLEF385CB3, PGLEF385CB4, PGLEF385CS4, PGLEF385CS3, PGLEF385CS2, PGLEF385CB2, PGLEF385CQ2, PGLEF385CQ3, PGLEF385CQ4
PGLEF385CS1 Schematic and Wiring Diagrams
City | Problem Description | Resolution |
---|
St. John's, Newfoundland and Labrador | Controller displays F1 ERR with beeping alarm. Cannot use any of the contoller functions while this is happening and cannot "Clear" or cancel. Range can be reset by turning off breaker to the range at the electical panel and turning back on a few minutes later, after which the range is fully functional until the next incident. | Timer inspected, no repairs necessary |
Calgary, Alberta | The appliance repair person took the motherboard out and says line L2 in does not connect to L2 out.
The oven turns on but only stays warm. The settings for turning up the heat do not work. | Repaired |
whitby, Ontario | I spoke to you on the phone and you said you might have one in stock or you will repair mine. It is visible where the burn mark is | Replaced with new in-stock timer |
Calgary, Alberta | Oven bake and broil elements stopped working, surface elements, timer, door lock, light are fine. F1 error goes on and off periodically. | Repaired |
Surrey, British Columbia | Display flashing PF 12:00 - buttons don't work. stove top works fine. This occurred after a power failure\surge.
We have had this issue with this unit in the past as well and the part was replaced under warranty. | Awaiting receipt of timer |
Medicine Hat, Alberta | IN past the buttons would not work ocasionally then when we went to turn oven on we heard a loud crack sound and nothing was on led screen | Repaired |
Medicine Hat, Alberta | STOVE WENT POP AND TIMER DOESNT WORK | Repaired |
London, Ontario | Oven elements do not heat. Both bake or broil. "PF" code displayed when first plugged in. display and stove top elements all work. | Awaiting receipt of timer |
Mount Forest, Ontario | Began by displaying F1 error intermittent for approx. 1 week then quit working completely. | Repaired |
Edmonton, Alberta | Oven stoped working bake and broil elements at the same time .
Top of stove works fine | Repaired |
Calgary, Alberta | While using the oven we heard a "pop" sound, the oven stopped working and the panel display went blank. There is no display or beeping sounds when we push the panel buttons. | Repaired |
whitby, Ontario | oven does not work but the cooktop works | Awaiting receipt of timer |
Edmonton, Alberta | THE PROBLEM STARTED WHEN I WENT TO SET THE OVEN TO BAKE AT 350, A SHORT BIT LATER THERE WAS A SMALL FLASH OF LITE THEN A PUFF OF SMOKE & THE CONTROL PANEL WENT INTO A oc MODE WITH THE CLOCK FLASHING ONLY3 DIGITS CONTINUALLY. THE OVEN NO LONGER WORKS.. WE HAD A TECH COME TO ASSESS THE PROBLEM & IT WAS DECIDED THAT THE CONTROLLER NEEDED TO BE REPLACED. BUT OT FOR THE PRICE THEY WANTED. THAT'S WHEN WE FOUND YOUR WEB SITE. yEAH!!!! | Replaced with reconditioned timer |
Coquitlam, British Columbia | F1 alarm came in. Turned power off to appliance at breaker panel. F1 alarm will not come in anymore. Broil and bake elements do not put out any heat. The stovetop elements, convection fan and all buttons on the touch pad are working correctly. | Repaired |
Common problems for Electrolux Electric Range PGLEF385CS1 Timer Repair
Are you encountering a similar problem as them? Contact us now and we will try to help you fix your PGLEF385CS1 timer-related problem.