What is the timer/clock part number for the Thermador GSC30CV 30" Drop-in Range?

Timer part number 487603 for Thermador GSC30CV

The GSC30CV 30" Drop-in Range uses timer part number 487603.

Do you have a failed Thermador GSC30CV control panel? Click here:

We can repair or replace your faulty Thermador GSC30CV timer.

GSC30CV are also sometimes referred to using these Alternative Names/Model numbers

Bosch GSC30CV 30" Drop-in Range, GSC30CVWC-01, GSC30CVWC, GSC30CVB, GSC30CVWH, GSC30CVWC1

GSC30CV Schematic and Wiring Diagrams

THERMADOR 30 diagram

Recent Service Requests

City	Problem Description	Resolution
DOVER, Massachusetts	The board display lights go off intermittently. When the display stays on it works fine. Some times the board is working but the display is out. If the display is out, can slam the door and display relights and everything is working. I hope it is not the relay board, as the nuts at the burners are frozen and the top can not be opened.	Awaiting receipt of timer
Lincoln, Nebraska	LCD display dead. All functions controlled by the timers push buttons non functional. (i.e. oven, broiler etc.). All functions controlled by switches not related to timer function as normal. (i.e. top electric burners, fan, etc.)	Repaired
INVER GROVE HEIGHTS, Minnesota	Display is too dim to use in normal daylight. Clock numbers are barely visible, but the the oven temperature is hardly visible at all. That is the only issue. Temp control works fine after counting the clicks to reach the desired oven temperature (real pita).	Awaiting receipt of timer
New Westminster, British Columbia	The temperature display has stopped working, it was faint for a while but is now now visible at all, the temperature control still works, you just have to count the clicks to set the temperature.	Repaired
Manzanita, Oregon	Display doesn''t work Controls seem to work fine	Repaired
FOREST PARK, Georgia	The element stays hot, bake cycle will not shut off.	Awaiting receipt of timer
Wall, New Jersey	Oven control is out completely.	Awaiting receipt of timer
Sherman Oaks, California	setting temperature and time makes numbers jump around. It is as if the rotary encoder is dirty. Please only fix the electronics. I don't need the enclosure or the mounting points repaired.	Timer inspected, no repairs necessary
Sherman Oaks, California	When trying to set the time or the oven temp. the numbers jump around. It acts like the rotary encoder is dirty.	Beyond Repair
Atlanta, Georgia	This is your second attempt to repair. Enclosed is a paper copy of original symptoms and receipts for payment and 3 year warranty. Current symptoms: 1) Clock numerals will spontaneously disappear (no longer illuminated). This will occur after an indeterminate period of time. Maybe hours, maybe seconds. Sometimes closing the oven door with a bang will bring the illumination back for a second or for a few minutes. 2) The same applies to oven temperature readings; they will spontaneously disappear (not illuminate), and may or may not come back for an indeterminate period of time by banging the oven door closed. 3) The timer numerals also disappear. 4) When timer numerals are illuminated and timer runs down to zero, there is no audible signal (no buzz or beep). 5) similarly, when oven reaches set temperature there is no audible signal (no buzz or beep) 6) We have only had the timer back from your shop for a short period of time and have not been able to operate it, or the oven, in any real capacity to fully test, so there may be other faults as well. I am including a wiring diagram from the original Thermador manual (hard copy) and photographs of the control unit with a note (hard copy). PLEASE TEST THE UNIT FOR A LONGER PERIOD OF TIME BEFORE RETURNING IT TO US. IT MAY SEEM TO WORK FOR A FEW SECONDS OR MINUTES, BUT HAS FAILED AFTER A LITTLE LONGER TIME. PERHAPS TEST OVERNIGHT. We do appreciate your service.	Awaiting receipt of timer
Atlanta, Georgia	Here are the symptoms: Lighted numbers of the timer/control unit will spontaneously go off as will power to the oven. Sometimes, if you slam the oven door they will come back on and the oven will work. This has been the situation for over 1 year. Most recently the oven will start but after 5 minutes, or after 30 seconds, it will shut off. This occurred for the first time 6 months ago and then did not reoccur until very recently. A local repair service identified the problem as the control panel, with the suggested repair of removing the existing control panel and having it repaired by a service provider such as your company. I sent the following message to your by your web site: "We have had a repairman diagnose our oven problem as a faulty control panel. Can you repair the control panel if we send it in? or Do you have a previously repaired control panel that we can buy? Please provide estimates. Thank you." I also included a photo of the range. Your folks responded as follows: "Hello, The timer you have requested is currently out of stock. Fortunately, we have successfully rebuilt many of these controls so I encourage you to send it in for repair. The repair cost is only $146 plus shipping. In most cases, our repairs will be completed within 5 business days from when we receive your timer. Also, your stove top burners will continue to function even after you remove the timer. We warranty all of our repairs for a full year and you can purchase longer warranties if you wish. Here is a link to a page on our website that addresses most questions about our Repair and Return Service. If you don't find the information you are looking for, please call toll free at 1-888-519-1939. Before sending your timer in for repair, please complete a Service Request and include a copy with your timer. Regards, Howard Simons ApplianceTimers.com 1-888-519-1939"	Repaired
BERKELEY, California	panel does not display. buttons inoperable. Stove does not go on.	Awaiting receipt of timer
San Diego, California	Oven (and broiler) heat up, but then spontaneously turn off. Single, short beep when turn off, like the single beep with set temp reached. Occasionally oven stays on for long time, sometimes turns off with 1-2 minutes.	Repaired
Bethesda, Maryland	Display stuck on ':0' . No other lights or indicators displayed. Oven will not turn on. No reaction to any of the buttons being pressed.	Beyond Repair
Cupertino, California	The timer display goes out after a while when using the oven above 350 degrees. The oven continues to function, as does the timer-it beeps when time is up. The electronics cooling fan never comes on, and the convection switch on the oven does not seem to do anything. I have verified that fans are capable of running and it is not a mechanical issue with the fans.	Repaired
Eau Claire, Wisconsin	all of a sudden screen would not illuminate, no functions from control board would work light and range including stovetop electrical heating element still work power supply to board measured at 2.3v in each lead relative to ground no visible damage not wet, no known issues prior (we have owned since we moved in July 2018)	Awaiting receipt of timer
Glen Gardner, New Jersey	The display is to dark to read but everything else works. It appears to need the display function repaired	Awaiting receipt of timer
York, Maine	Oven does not work	Awaiting receipt of timer
Miami, Florida	Bake and Broil cycles both start but then shut off within seconds. The problem started off being intermittent but is now persistent. This is the main problem that we need repaired. Also the numerals of the green LED display are now not working properly, after a local technician tried to repair the board by cleaning up the PCB, solder, etc. Too many sections now light up :(	Beyond Repair
Pendleton, Indiana	The past couple of years sometimes the oven will not stop at the preheat setting I've indicated and now it's getting more regular especially if the oven gets hot. Also the LED letters will fade in brightness if the oven gets very warm(400+)	Repaired

Common problems for Thermador 30" Drop-in Range GSC30CV Timer Repair

Are you encountering a similar problem as them? Contact us now and we will try to help you fix your GSC30CV timer-related problem.

I am trying to replace the clock,Oven Control on this model. I don't believe the replacement part is still available. Advice needed on how to remove the oven control module. Where is the power supply for this component located? Should this be checked also? Can I use the Bosch AP2836528 as a replacement sub? Otherwise I will remove and send the defective part in to be repaired. Any advice on how to disassemble the front of the oven to remove this part and a diagram of the unit? I have the Service manual. I had a service tech come out yesterday who had never worked on this unit and was unsure as to the best approach.

I have a 14 year old Thermador GSC30B oven that works well except for a worn out display. Because of the low resolution of the image, I cannot tell which part I need from this diagram. I believe the display is all that is broken. The buttons still appear to work correctly: for example, I can turn on the oven, I just can't see the clock, clock, oven temperature, etc. What part number do I need to order?

I Have A range Model Tappan Of 4 Burners And The clock Of The Furnace Was Disturbed To Me Does Not Work The Screen Of The Ignition Of The Furnace And Therefore I Do Not Have Working The Furnace But The Problem Is That Only Have The Model The Anus I Do Not Buy Myself Here And Already Was The range So Not Like Finding The Piece What Fails Is The Digital Screen Of Where The Furnace Ignites

I have an older Thermador oven/range model GSC30CV. It is in great condition except that the igniters continuously click/spark. I have placed a call into the local service folks, who seem at a loss at to which parts/likely cause. They haven't made it out to me yet (out here in Maine). This has happened on and off in the past (especially with humid weather - we live near the shore). In 2004, they replaced the "power relay" but evidently that part is no longer available. They aren't sure that that is the cause anyway...any ideas how to proceed?

my Thermadoro dual fuel #ESC30CV/GSC30CV too way too long to

I have a Thermador GSC30CV gas cooktop/electric oven. Last night, with no controls on, the unit started an intermittent beeping and the control displayed an F-2 default code. After tripping the panel breaker, I could still light the gas burners manually. Kindly advise.

I'd like to convert an old Thermador GSC30CV oven from natural gas to propane. Thermador no longer makes the SLPKit for the conversion and they could not give specs for the necessary hardware. Is this going to be possible?

Trying to find a new griddle for Thermador model #GSC30cv. Or is there a substitute griddle we could use?

I have an old thermador cook n vent oven modle GSC30CV. In the oven control window is a 4 error code. The oven top works fine, but the oven is unresponsive. This is the first issue I've had with the oven since we've had it.

I have thermador GSC30cv. Recently I turned the knob for the fan while the oven was on. I heard a popping sound & briefly smelled something burning (like wiring maybe?). Now the electronic ignition of the burners doesn't work & neither does the display panel. I turned on the oven this afternoon & the controls worked (clock & thermostat) but the oven took about 2 hours to reach 345* F (it wouldn't even get to the set temp of 350*). Do you have any suggestions, thoughts about what is wrong & if it can be repaired. Is this something I might be able to repair myself, say by replacing fuse or such? Thanks in advance for any help, sugeestions. mb

Thermador gsc30cv - oven and broiler stopped functioning. The component fan starts and then turns off in less than one minute. What is the best approach to repair?

Thermador Model: GSC30CVB, Serial 93040671 oven Electric oven control panel, and oven, do not work (gas burners still fine). Smoke started coming out of the sealed control panel. It stopped burning with I turned off the circuit breaker. It's a built-in elec/convect/broil oven, 4 gas burners, elec. grill with metal cover. We need the downdraft because there is no way to install an overhead vent. The readout controls (time/temp) had been fading or losing connection for about a year, but strong or sharp pressure would fix it. I was washing the oven-top with soapy water when smoke started coming out of the front (sealed) panel cover. It is possible water MAY have trickled under the grill cover & reached the plug-in socket for the grill element. The front panel appears sealed. Repairman thought it needs a relay board. Can you send me a PDF that would show the parts layout or tell me how to get it. Can also you explain what happened? Thanks for your help!

I noticed that the Maytag display AP367514 looks very simlar to the display of the thermador. Are they the same? Could I save $100 by getting just the Maytag display head.