What is the timer/clock part number for the Frigidaire CFES387CFS5 Range?

Timer part number 318012928 for Frigidaire CFES387CFS5

The CFES387CFS5 Range uses timer part number 318012928.

Do you have a failed Frigidaire CFES387CFS5 control panel? Click here:

We can repair or replace your faulty Frigidaire CFES387CFS5 timer.

CFES387CFS5 are also sometimes referred to using these Alternative Names/Model numbers

Electrolux CFES387CFS5 Range

Recent Service Requests

City	Problem Description	Resolution
Iona station, Ontario	Very very dim digital display	Awaiting receipt of timer
Laval, Quebec	Oven does not work but stove and display are fine.	Repaired
Calgary, Alberta	Happy of your repairs on the first unit which I have got today. Now I am sending the second unit which has been working for 15 years but F1 error sporadically shown up (temperature sensor is OK). -Finally the oven has stopped work ( baking and convection functions). -Visible reducing of the display brightness	Repaired
Calgary, Alberta	Digital clock doesn't work. Black display. All oven functions don't work as well	Repaired
Saint-Jean-sur-Richelieu, Quebec	Nothing on display. Stove top is functional (with timer in place or removed).	Repaired
Dartmouth, Nova Scotia	Always has dim, barely readable display in red LED segment sections. Blue segments aren't as good as when the stove was first purchased but they are much better than the red ones. I have been getting by with it so far by noting that the timer starts at 350F and that the temperature changes by 5F each time I tap the raise or lower button. I am able to see that there is a change even though I can't read the value so pressing UP 5 times gets me to 375F for example. The timer works well otherwise. I removed the timer and disassembled it to get access to the circuit boards. I determined that the various DC voltage sources 5V, 12V and 24V are strong and that the capacitors are OK. That's as far as I can take it and I am told this is a fairly straight forward repair so I would like this done if possible. I would also like to have any parts that are removed to be placed in the small plastic bag that I have sent with the timer. I want to understand what the issues are with things that break so I can be prepared the next time this happens and having access to the faulty parts will help. At some point I will simply have to replace the whole stove.	Repaired
Dartmouth, Nova Scotia	Always has dim, barely readable display. Poor segment illumination. Works well otherwise. I am told this is a fairly straight forward repair so I would like this done.	Repaired
Arnprior, Ontario	-lower oven element will not heat-up during oven warm-up -element OK (continuity test 19 Ohms) -stove top functions fine -wiring checked OK	Repaired
Belleville, Ontario	Bottom element not working	Repaired
Mississauga, Ontario	Beeps and turns off when using oven	Awaiting receipt of timer
Keswck, Ontario	Digital display for the oven functions in red are very dim. Also there must be a bad solder joint as sometimes we have to tap it to get it to work.	Repaired
Toronto, Ontario	Simply want to replace cracked face and illuminated electronic plate so numbers will be visible once again. Do you folks have a new or refurbished unit. Could you send a pic and I would gladly purchase. Thank you	Awaiting receipt of timer
Pickering, Ontario	dead - no screen display oven won't heat up	Awaiting receipt of timer
Halifax, Nova Scotia	Display blank. Stove top elements work fine.	Awaiting receipt of timer
Edmonton, Alberta	Lower Oven Element and Convection Oven not working. everything else is fine.	Repaired
Peachland, British Columbia	Lower oven heater element not working. The element was tested and it is still good.	Awaiting receipt of timer
Mascarene, New Brunswick	Convection oven would work normally. Regular oven would not heat to set temperature. It appeared that lower element wasn't working. Also, illuminated control reading was very dim, becoming almost unreadable.	Repaired
Mascarene, New Brunswick	Convection oven would work normally. Regular oven would not heat to set temperature. It appeared that lower element wasn't working. Also, illuminated control reading was very dim, becoming almost unreadable.	Repaired
Welland, Ontario	Oven will not reach desired temperature above 200 degrees.	Repaired
Guelph, Ontario	temperature number can not be seen.dimmed,	Awaiting receipt of timer

Common problems for Frigidaire CFES387CFS5 Timer Repair

Are you encountering a similar problem as them? Contact us now and we will try to help you fix your CFES387CFS5 timer-related problem.

Is there any way I could clean the glass that in the middle of the oven door?

I have an frigidaire gallery range/oven. The digital read out for the oven temperture is almost impossible to read as it is very very dull. What can I do to be able to view the tempertaure reading easier? Thank you Andrea